Selected car:

Go directly to your car page

OK
In order to give you the best possible support we need to know which car you have, since functionalities, services and features may differ between models. By selecting a car model your search will include information from the owner's manual for that specific model. We do several model year updates every year. Each new update comes with a specific model year code that you will find at the back of your Owner’s Manual. The code is written as ATXXXX, for example AT1446.
Owner's manual online

ISOFIX/LATCH lower anchors

Lower anchors for ISOFIX/LATCH-equipped child seats are located in the rear, outboard seats, hidden below the backrest cushions.

Using the ISOFIX/LATCH lower child seat anchors

Symbols on the seat back upholstery mark the ISOFIX/LATCH anchor positions as shown. To access the anchors, kneel on the seat cushion and locate the anchors by feel. Always follow your child seat manufacturer's installation instructions, and use both ISOFIX/LATCH lower anchors and top tethers whenever possible.

To access the anchors

Put the child restraint in position.

Kneel on the child restraint to press down the seat cushion and locate the anchors by feel.

Fasten the attachment on the child restraint's lower straps to the ISOFIX/LATCH/LATCH lower anchors.

Firmly tension the lower child seat straps according to the manufacturer's instructions.

Volvo's ISOFIX/LATCH anchors conform to FMVSS/CMVSS standards. Always refer to the child restraint system's manual for weight and size ratings.

  • The rear seat's center position is not equipped with ISOFIX/LATCH lower anchors. When installing a child restraint in this position, attach the restraint's top tether strap (if it is so equipped) to the top tether anchorage point and secure the restraint with the vehicle's center seat belt.
  • Always follow your child seat manufacturer's installation instructions, and use both ISOFIX/LATCH lower anchors and top tethers whenever possible.
Fasten the attachment correctly to the ISOFIX/LATCH lower anchors

Fasten the attachment correctly to the ISOFIX/LATCH lower anchors

  • Be sure to fasten the attachment correctly to the anchor (see the illustration). If the attachment is not correctly fastened, the child restraint may not be properly secured in the event of a collision.
  • The ISOFIX/LATCH lower child restraint anchors are only intended for use with child seats positioned in the outboard seating positions. These anchors are not certified for use with any child restraint that is positioned in the center seating position. When securing a child restraint in the center seating position, use only the vehicle's center seat belt.

Was this helpful?

Thanks for your feedback.
Glad we could help.
Feedback
Send
Yes No